KNX SERIES
KNX 4-Channel Switch Actuator/16A
AX/G-NR4.16.1
Certification：CE/KNX
Dimension：72*90*64mm
KNX Bus Voltage：30VDC
KNX Bus Current：<5mA
KNX Bus Power Consumption：<150mW
Number of Switching Output Channels：4
Load current：16A
KNX 8-Channel Switch Actuator/10A
AX/G-NR8.10.1
Certification：CE/KNX
Dimension：144*90*64.3mm
KNX Bus Voltage：30VDC
KNX Bus Current：<5mA
KNX Bus Power Consumption：<150mW
Number of Switching Output Channels：8
Load current：10A
KNX 8-Channel Switch Actuator/16A
AX/G-NR8.16.1
Certification：CE/KNX
Dimension：144*90*64.3mm
KNX Bus Voltage：30VDC
KNX Bus Current：<5mA
KNX Bus Power Consumption：<150mW
Number of Switching Output Channels：8
Load current：16A
KNX Power Supply 1280mA with Auxiliary Output
Model：AX/G-P1280.1
Certification：CE/KNX
Dimension：72*90*64mm (W*H*D)
AC Input：198~264VAC
StandbyPower Consumption：<0.5W
Typical Efficiency：90%（Inputefficiency upstream ofthe choke）(230VAC，full load)
KNX Bus Output：30VDC±5%(KNX Red/BlackTerminals）
Non-choke-filtered DC voltage output：30VDC±5%(Auxiliary poweroutput）
Rated Current：1280mA
Rated Power：38.4W
24VDC Power Supply for KNX Applications
Model：AX/G-P100-24.1
Certification：CE/UKCA/EAC
Dimension：72*90*64mm (W*H*D)
AC Input：198~264VAC
Standby Power Consumption：<0.3W
Typical Efficiency：91%(230VAC，full load)
Rated Current：4.2A Max
Rated Power：100.8W
Ripple and noise：200mVp-p
Startup/rise time：<0.5S(230VAC，full load)
KNX DALI Lighting Controller,
1/2 Channel
Model：AX/G-DDW1.1 /AX/G-DDW1.2
Certification：CE/KNX
Dimension：72*94.5*64.5mm
KNX Bus Voltage：30VDC
Auxiliary Power Supply Input Voltage：230VAC
Power Consumption：<9.44W
Numberof channels：1/2
DALI Bus Voltage：Built-inDALIPowerSupply;Voltage range:18V±0.5VDC
Certified Minimum Current：125mA 250mA
Certified Maximum Supply Current：250mA 500mA
Get Free ETS6 & DALI Configuration Guide
KNX Microwave Motion and Presence Sensor
Model：AX/F-CMMS.1
Certification：CE / KNX
Dimension：φ67 × 40 mm
Detection Distance：6m max
Installation Height：< 4m
Illuminance Range：0 – 65535 lux
Delay Time：Adjustable
KNX Bus Voltage：30 VDC
Auxiliary Power Input：21 – 30 VDC
Operation Temperature：-5 ~ +45 ℃
KNX 24GHz Millimeter Wave Presence Sensor
Model：AX/F-CMPS.1
Certification：CE / KNX
Dimension：φ67 × 40 mm
Motion Sensing Distance：5.5m max
Presence Sensing Distance：4m max
Installation Height：< 4m
Illuminance Range：0 – 65535 lux
Delay Time：10 – 3600s
KNX Bus Voltage：30 VDC
Auxiliary Power Input：21 – 30 VDC
Operation Temperature：-5 ~ +45 ℃
Mini DALI to 0/1-10V Converter with Relay (Square Version)
Model: AX/F-DDE1.8.2
The load can be switched from 0/1 to 10V through a relay
Power supply via DALI bus
Small size
Compatible with mainstream DALI systems on the market
Certification:KNX/CE
Size:64.5*40*22.7mm(LxWxH)
Mini DALI to 0/1-10V Converter with Relay (Round Version)
Model: AX/F-NDR1.8.1
It can be accessed through a relay switch
Power supply via DALI bus
Small size
Compatible with mainstream DALI systems on the market
Certification:KNX/CE
Size: φ55*3.4mm
3-Channel DALI bus power supply
Model:AX/G-NDP.3.250.1
Certification:KNX/CE
Size:90*72*64mm(LxWxH)
Products compatible with the DALI protocol
3-channel independent output
KNX Multi-Functional Input/Output Module with NTC
Model: AX/F-IOUI4.4.1
Certification: CE / KNX
Dimension: 46.6 × 46.7 × 11.8 mm (Flush-Mounted)
Configurable Channels: 4-CH (Individually configured as Dry Contact Input or LED Output)
Dedicated Channels: 4-CH Dry Contact Input
Temperature Input: 2-CH NTC 10K Temperature Monitoring
LED Output: 5V / 12V DC (5mA current limit per channel)
KNX Bus Voltage: 30 VDC
Bus Current: < 17 mA
Operation Temperature: -5 ~ +45 ℃
Get Free ETS6 & DALI Configuration Guide
KNX 0-10V Signal Converter and Lighting Controller (DIN-Rail)
Model: AX/G-DE4.10.1 (4-CH) / AX/G-DE8.10.1 (8-CH)
Certification: CE / KNX
Dimension (W×H×D):
4-CH: 72 × 90 × 64 mm (4 Standard Modules)
8-CH: 144 × 90 × 64 mm (8 Standard Modules)
Output Channels: 4 or 8 Independent Channels
Signal Output: 0 – 10V DC (40mA max per channel)
Switching Capacity: 230V AC @ 50Hz, 10A per channel
KNX Bus Voltage: 30 VDC
Auxiliary Power Supply: 24 – 30 VDC
Operation Temperature: -5 ~ +45 ℃
Mechanical / Electrical Life: 1,000,000 / 100,000 operations
86-Type KNX 4-Channel / 6-Channel Push Button Interface
Model: AX/P-4K (4-Button) / AX/P-6K (6-Button)
Certification: CE / KNX
Dimension: 89.8 × 85.8 × 33.3 mm
Installation: Standard 86-Type Wiring Box (Concealed Mounting)
Control Channels: 4 or 6 Independent Buttons
Output Load: Signal Output Only (No Integrated Relay)
KNX Bus Voltage: 30 VDC
Bus Current: < 20 mA
Operation Temperature: -5 ~ +45 ℃
86-Type KNX 4-Channel / 6-Channel Push Button Interface with Relay
Model：AX/P-4K-R AX/P-6K-R
Certification：CE/KNX
Dimension：89.8*85.8*33.3mm
Install：86-typewiring concealed mounting box installation
Ta/OperationTempe：-5 ~ +45℃
Ts/StorageTemp：-20~ +60℃
KNX bus supply voltage：30VDC
Bus current consumption：<20mA
Bus power consumption：<600mW
Programming button/LED indicator：Set physical address
Manual button/LED indicator：Manual control and indication
DALI POWER SUPPLY
Slim 24V DALI Dimming LED Power Supply, IP20 Class II
Product Type: Constant Voltage LED Driver
Dimming Interface: DALI Dimmable
Output Voltage: 24V DC
Output Power: 30 – 100W
Input Voltage: 220 – 240V AC (50/60 Hz)
Power Factor: ≥ 0.95
Current Ripple: 0.5% (Flicker-Free)
Max Efficiency: Up to 92%
Dimension (L×W×H): 350 × 30 × 18 mm (Slim Housing)
Protection: Overload / Short Circuit / Open Circuit / Overheat Protection
Safety & Rating: SELV / IP20 / Insulation Class II
Lifespan / Warranty: 60,000 Hours / 5 Years
DALI-2 Smart LED Driver (15-36W) - Supports CLO, NFC & EL Emergency
Product Type: Constant Current LED Driver
Dimming Interface: DALI-2 (Supports DiiA Part 251, 252, 253) / PUSH DIM
Dimming Range: 1% – 100%
Output Power: 15W / 23W / 36W
Configuration: Wireless NFC Current Setting
Advanced Features: CLO (Constant Light Output) / Corridor Mode / EL Emergency Mode
Dimensions (L×W×H):
15W & 23W (Independent): 138.7 × 31 × 21.5 mm
15W & 23W (Built-in): 118.7 × 31 × 21.5 mm
36W (Independent): 163.7 × 31 × 21.5 mm
36W (Built-in): 143.7 × 31 × 21.5 mm
Startup Time: ≤ 0.7s @ 230V AC
Protections: Short Circuit / Overload / No-Load / Insulation Class II
Safety & Ratings: IP20 / CE Certified
Operation Temperature: -20 ~ +50 ℃
Applications: Premium LED Panel Lights, Downlights / Tube Lights
Built-in DALI-2 DT8 Smart LED Power Supply (12W / 20W / 30W / 42W)
Product Type: Constant Current LED Driver (Built-in Type)
Dimming Interface: DALI-2 DT8 (Tunable White) / Push Dim
Dimming Range: 1% – 100%
Output Power: 12W / 20W / 30W / 42W
Configuration: Wireless NFC Parameter Setting
DALI Advanced Functions: CLO (Constant Light Output) / Corridor Function / EL Emergency Mode / DiiA Part 251, 252, 253
Dimensions (L×W×H):
12W (Built-in): 118.7 × 31 × 21.5 mm
20W (Built-in): 143.7 × 31 × 21.5 mm
30W & 42W (Built-in): 122.5 × 44 × 23 mm
Current Ripple: ≤ 5%
Startup Time: < 1.0s @ 230V AC (Full load via DALI system)
Protections: No-Load / Short Circuit / Overload / Insulation Class II
Ambient Temperature (Ta): -25 ~ +45 °C
Safety & Warranty: CE Certified / 5 Years Warranty
Applications: Tunable White Downlights, LED Panel Lights